Envirograf Intumescent Door Upgrade Kit RFC
Intumescent door upgrade kit designed for upgrading Victorian/Georgian/Edwardian doors to 30 minutes fire doors. Minimum requirements for the door: Rails/Styles thickness = 32mm Panel thickness = 10mm If your door is less that the requirements above then you need to use the Intumescent door upgrade kit DK1 Water-based clear or white intumescent coating kit for upgrading raised-and-fielded or flat panelled doors to fire door status. Each kit contains sufficient primer, intumescent coating and top coat to treat an area of 6m² (approximately 3 to 4 door sides, dependent on the size of the doors).
Price Match - Call Now for Best Prices
Bulk orders/trade enquiries: 01752 690997.
Next working day delivery available.
Intumescent Coating Kits to upgrade raised and fielded doors to fire-rated doors.
Minimum requirements for the door:
Rails/Styles thickness = 32mm
Panel thickness = 10mm
If your door is less that the requirements above then you need to use the Intumescent door upgrade kit DK1
Intumescent door upgrade kit designed for upgrading Victorian/Georgian/Edwardian doors to 30 minutes fire doors. This is a clear or white intumescent coating system for upgrading doors and panelling to fire door status. Materials contained in each kit are enough to cover an area of 6m² (according to the size of the door, enough material to cover three to four sides of single doors). Only the risk side needs to be coated on room doors and both sides on doors leading onto corridors or at the tope of stairs.
There is no need to remove any existing paints, varnish or gold leaf; this product can be applied directly over all previous coatings after normal surface washing. Fire tests have been carried out on specific panels and doors.
Available in clear or white as standard, with a range of finishes.
Because the coatings must be applied in a specific way in order to achieve the required fire ratings, please ensure you read the application data supplied with the kit before using. Here, in-depth Application Instructions for the range can be found, including the recommended loading rate. The Technical Information summarises the recommended usage of the coatings and contents of the kits. COSHH data is also available on request.
Ref Colour Finish
ES/RFC/WM White Matt
ES/RFC/WS White Satin
ES/RFC/WG White Gloss
ES/RFC/CM Clear Matt
ES/RFC/CS Clear Satin
ES/RFC/CG Clear Gloss
Each upgrade kit contains the following:
0.5 Litre primer.
1.5 Litre intumescent coating.
0.5 Litre top coat.
IMPORTANT INFORMATION ON PURCHASING OF PASSIVE FIRE PROTECTION PRODUCTS NOTICE:
The information displayed about the products on this website is to be used for guidance ONLY, we advise that all customer contact our technical department to obtain a free no obligation specification and quotation before purchasing goods directly from the website.
Products purchased directly from our website without specification will NOT qualify for certification.
Please be aware that any negligence caused by failure to obtain the relevant advice, or availment of our specification and estimation service, will absolve International Passive Fire Ltd from any liability should Passive Fire Protection Products prepared, or used, by the purchaser, or any other parties, result in damage to property or human life, or for any monetary costs incurred due to incorrect usage.
CALL THE EXPERTS
NEXT DAY DELIVERY AVAILABLE
PEACE OF MIND
14 DAY MONEY-BACK GUARANTEE
CALL FOR BEST PRICES