Envirograf Hinge, Lock and Door Closer Protection
Flexible intumescent sheet used to protect metal hinges, locks and door closers in a fire.
Bulk orders/trade enquiries: 01752 690997.
14 Day money-back guarantee*.
Next working day delivery available.
A flexible, 1mm-thick intumescent protection sheet, fitted with self-adhesive backing. For use behind hinges and steel door closers. Also part of the range is a set of three self-closing hinges, which act as a complete door closer.
Supplied in standard sizes to make installation quick and convenient- Protects metalwork on doors for up to 91 minutes.
Intumescent paper cools the lock, hinges, and screws and protects them from overheating in the event of a fire.
Self-closing hinges can be individually adjusted, for example to have more tension, or to allow for buckled door tops.
Hinge, Lock and Door Closer Protection:
Hinges: Remove hinges from both door and frame, cut the cut the Envirograf® intumescent paper to size to size, sandwich it between hinge and rebate on both door and frame then screw the hinges back.
Lock & Keep: Remove lock, cut the Envirograf® intumescent paper to size, wrap it around the lock and sandwich it between the lock and door as you replace the lock. Place paper under the keep plate as well.
Door Closer: Before fitting a door closer sandwich pre-cut cut the Envirograf® intumescent paper between the closer and the door face then fasten the closer to the door. When ordering state the size of intumescent paper required for your door closer.
DO NOT peel off the grey intumescent paper on the back of the hinges: it is an essential part of the fire protection product!
Ensure there is a gap of 3½ – 4mm at the head and closing side and a 1mm gap on the hinge side.
Fit the hinges to the door and frame and see whether the door closes without adjustment.
If adjustment is required, then adjust the top and bottom hinges with the larger Allen key to close the door fully onto the seals without slamming. Then insert the grub screw into the threaded hole and tighten fully with the smaller Allen key.
Adjust the centre hinge slightly tighter than the other two hinges to latch Allen keys and screws are supplied with the set of three hinges.
HP300 300mm x 300mm
CALL THE EXPERTS
NEXT DAY DELIVERY AVAILABLE
PEACE OF MIND
14 DAY MONEY-BACK GUARANTEE
CALL FOR BEST PRICES