Thermoguard Fire Varnish Overcoat 20m2

Thermoguard Clear Fire Varnish Overcoat 20m2 is a clear single pack varnish for over coating the Fire Varnish basecoat. This coating is designed for use internally. When used over the top the Thermoguard Fire Varnish Base Coat a fire rating of Euroclass B-S2-D0 can be gained.

The special formula provides a tough, durable finish to internal wood. Clear or stained topcoats enhance the natural beauty of the wood while fire protecting new/bare and surfaces painted with Fire Varnish Basecoat.

Benefits For timber/timber derived substrates, using this clear topcoat

• Clear and wear-resistant finish
• Certificate of Supply available when used over Thermoguard Fire Varnish Basecoat

Preparation

• Cover, countersink & fill, or use non-ferrous, galvanized, stainless or sheradised fittings
• Ensure surfaces are dry, clean and free of all contamination.
• Varnished, sealed or non-porous wood should be abraded thoroughly with medium grade silicone carbide abrasive when dry to provide a good key.

Application conditions for the Thermoguard Clear Varnish system

During application & drying of the full system:

• Ensure surfaces are thoroughly dry – max 18% moisture content.
• Maximum relative humidity RH 75%.
• Ensure adequate ventilation.
• Minimum air temperature 6°C. Minimum surface temperature 3°C above dewpoint – avoid condensation.

Cleaning tools and storing Thermoguard Clear Overcoat

• Return as much unused material to its original container as possible. Wash brushes rollers and guns with clean water immediately following use.
• Health and Safety – Please refer to the relevant Safety Data Sheet for full details of this product and safely apply all products in accordance with BS 6150:2019- Code of practice for painting of
  buildings.
• Do not store this product in cold temperatures below 5°C or above 30°C.

Health and Safety

• Please refer to the relevant Safety Data Sheet for full details of this product
•  Apply all products in accordance with BS 6150:2019- Code of practice for painting of buildings.
• Do not store this product in cold temperatures below 5°C or above 30°C.

Please refer to data sheets before application, if you do not have copies please email us at sales@fireproofpaint.co.uk to request a copy.

For technical advice and other enquiries, please contact us on 01752 690997.

IMPORTANT INFORMATION ON PURCHASING OF PASSIVE FIRE PROTECTION PRODUCTS NOTICE:

The information displayed about the products on this website is to be used for guidance ONLY, we advise that all customer contact our technical department to obtain a free no obligation specification and quotation before purchasing goods directly from the website.

Products purchased directly from our website without specification will NOT qualify for certification.

Please be aware that any negligence caused by failure to obtain the relevant advice, or availment of our specification and estimation service, will absolve International Passive Fire Ltd from any liability should Passive Fire Protection Products prepared, or used, by the purchaser, or any other parties, result in damage to property or human life, or for any monetary costs incurred due to incorrect usage.