For sales or technical enquiries call:

01752 690997 or 0800 0277 955

Or email us: ku.oc1547576946.tnia1547576946pfoor1547576946perif1547576946@sela1547576946s1547576946

Watco Anti Slip Concrete Floor Paint 5 Litres

Availability : In stock
£76.40

Added texture for better, safer grip. With all the features of the standard Watco Concrete Floor Paint, the Anti Slip version includes an additional anti slip aggregate to give the surface better adhesion and increased grip to help prevent workplace accidents, even in wet or oily conditions.

Available in 5 litres

This evenly textured, easily cleanable coating can be applied to concrete, metal or wood and is available in 10 colours.

  • Better texture: Includes a fine aggregate that disperses as paint is applied by roller, making the surface easier to maintain with a more uniform texture than other solutions.
   Price Match - Call Now for Best Prices
   Bulk orders/trade enquiries: 01752 690997.
   Next working day delivery available.

NEED HELP?

Clear
SKU: N/A Categories: ,

Added texture for better, safer grip. With all the features of the standard Watco Concrete Floor Paint, the Anti Slip version includes an additional anti slip aggregate to give the surface better adhesion and increased grip to help prevent workplace accidents, even in wet or oily conditions.

This evenly textured, easily cleanable coating can be applied to concrete, metal or wood and is available in 10 colours.

  • Better texture: Includes a fine aggregate that disperses as paint is applied by roller, making the surface easier to maintain with a more uniform texture than other solutions.

Our unique formula based on a blend of ceramic, ‘diamond hard’ wax and polyurethane resin, has produced a ‘Best in Class’ single pack paint for general use. Watco Concrete Floor Paint Anti Slip provides a good level of slip resistance and the anti slip particles are pre-blended which makesit easier to achieve a uniform finish.

All grades now carry CE Mark EN 1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility.

All tests have been undertaken to ISO standard where applicable, and demonstrated this ‘Best Ever Formulation’ to be four times more scratch resistant than previously, twice as hard wearing and with 50% improved adhesion.

This attractive, hardwearing coating is easy to apply and dries quickly to provide a low maintenance, tough, oil resistant finish. For areas where an Anti Slip version is not required Watco Concrete Floor Paint is recommended. To help disguise imperfections in the floors surface we recommend Watco Matt Concrete Floor Paint, which reduces reflection and glare on the surface. Both carry the same benefits as Watco Concrete Floor Paint Anti Slip without the added value of slip resistance.

SURFACE PREPARATION:

Bare Concrete – remove surface laitance, dust and any light dirt or grease deposits using Watco Etch & Clean. Watco Etch & Clean also etches smooth, bare concrete surfaces to provide a key. Flush with clean water and allow surface to dry. For the removal of heavier deposits of oil and grease we recommend Watco Concroff, again, flush with clean water and allow the surface to dry.

New Concrete – as a guide, new concrete should be left for four weeks to dry in the summer and six in the winter. The surface should then be prepared using Watco Etch & Clean and thoroughly rinsed away and left to dry prior to applying this coating.

Priming – is not usually required, but for very porous high suction surfaces, such as sand and cement screed, use Watco 4 Hour Epoxy Primer. Concrete should be sufficiently porous to allow the paint to penetrate, so very smooth or power floated concrete is unsuitable unless first primed with Watco Powerfloat Primer.

Painted Surfaces – abrade to remove any weak or loose paint. Check remaining paint is well bonded. Very smooth, glossy paint should be lightly abraded to provide a key. Watco Bio D can be used to remove grease and oil from painted surfaces. Watco Concroff is a very powerful degreaser for contaminated bare concrete, (do not use on a previously painted surface since it can soften paint).

APPLICATION: The paint should be thoroughly stirred and must not be thinned. Apply by roller and work well into the surface. Use a paint brush for edges. Avoid applying the paint too thickly. The second coat can be applied as soon as the first coat is dry (generally 16 hours), and should be applied within 5 days. If more than 5 days elapse, the first coat should be lightly abraded before the second coat is applied. Avoid washing the surface for 7 days.

SAFETY: Watco Concrete Floor Paint is flammable and should be used in a well ventilated area. In common with all non-porous decorative finishes, the surface can become slippery under certain conditions. All product labels provide general safety information. Material Safety Data Sheets are available. Food products must be removed from the area during application and drying process.

How to brighten drab concrete with Concrete Floor Paint

How to paint a concrete floor

 

Phone

01752 690997

CALL THE EXPERTS

Free shipping

FAST SHIPPING

NEXT DAY DELIVERY AVAILABLE

Money

PEACE OF MIND

14 DAY MONEY-BACK GUARANTEE

Payment

PRICE MATCH

CALL FOR BEST PRICES

Finish:

,

Colour

Blue Grey – RAL 7000, Dark Grey – RAL 7005, Hazzard Yello – RAL 1021, Light Grey – RAL 7035, Mid Blue – RAL 5015, Mid Green – RAL 6002, Mid Grey – RAL 7036, Sandstone – RAL 1014, Signal Red – RAL 3020, Stone – RAL 7032, Tile Red NO RAL, White – RAL 9010

Reviews

Be the first to review “Watco Anti Slip Concrete Floor Paint 5 Litres”

We use cookies to ensure that we give you the best experience on our website.

Enquiry Form
Your Name
Email Address
Phone
Company
Contact Information
Message
Unit A2 Kingsley Close, Lee Mill Industrial Estate, Ivybridge, PL21 9LL
01752 690997
Send Message
Buy direct from one of the UK's leading fireproofing specialists.
I have read the Privacy Policy