For sales or technical enquiries call:

01752 690997 or 0800 0277 955

Or email us: ku.oc1553266177.tnia1553266177pfoor1553266177perif1553266177@sela1553266177s1553266177

Watco Concrete Floor Paint 5L

Availability : In stock
£70.90

100% harder wearing than the previous formula!

Available in 5 litres

Brighten and dustproof dull, drab concrete with our toughest ever High Gloss single pack floor paint. The unique formula based on a blend of ceramic and polyurethane resins will transform your concrete floor into a dustproof, oil resistant and easy clean surface. Tested to CE Mark EN1504-2, Watco Concrete Floor Paint demonstrates superior impact, wear and scratch resistance, hardness, adhesion and durability.

   Price Match - Call Now for Best Prices
   Bulk orders/trade enquiries: 01752 690997.
   Next working day delivery available.

NEED HELP?

Clear
SKU: N/A Categories: ,

Brighten and dustproof dull, drab concrete with our toughest ever High Gloss single pack floor paint. The unique formula based on a blend of ceramic and polyurethane resins will transform your concrete floor into a dustproof, oil resistant and easy clean surface. Tested to CE Mark EN1504-2, Watco Concrete Floor Paint demonstrates superior impact, wear and scratch resistance, hardness, adhesion and durability.

Available in 5 litres

  • Coverage: Approx 40m² per 5L per coat. Two coats are recommended.
  • Likes most surfaces: Concrete, wood, metal, painted or unpainted. For interior use only.
  • Many uses: Ideal for warehouses, production areas, workshops and general use areas.
  • New formula: Now lasts twice as long.
  • Attractive: Beautiful finish.
  • Easy to apply: Use a medium pile roller. Cut in using a brush.
  • New colour range: Now to RAL reference.

Our unique formula is based on a blend of ceramic, ‘diamond hard’ wax and polyurethane resin, has produced a ‘Best in Class’ single pack paint for general use.

All tests have been undertaken to ISO standard where applicable, and demonstrated this ‘Best Ever Formulation’ to be four times more scratch resistant than previously, twice as hard wearing and with 50% improved adhesion.

This attractive, hardwearing coating is easy to apply and dries quickly to provide a low maintenance, tough, oil resistant finish. Watco Matt Concrete Floor Paint helps to disguise imperfections in older floors and reduce reflection or glare. It’s still easy to keep clean and has all the benefits of the high gloss finish.

SURFACE PREPARATION:

Bare Concrete – remove surface laitance, dust and any light dirt or grease deposits using Watco Etch & Clean. Watco Etch & Clean also etches smooth, bare concrete surfaces to provide a key. Flush with clean water and allow surface to dry. For the removal of heavierdeposits of oil and grease we recommend Watco Concroff, again, flush with clean water and allow the surface to dry.

New Concrete – as a guide, new concrete should be left for four weeks to dry in the summer and six in the winter. The surface should then be prepared using Watco Etch & Clean and thoroughly rinsed away and left to dry prior to applying this coating.

Priming – is not usually required, but for very porous high suction surfaces, such as sand and cement screed, use Watco 4 Hour Epoxy Primer. Concrete should be sufficiently porous to allow the paint to penetrate, so very smooth or power floated concrete is unsuitable unless first primed with Watco Powerfloat Primer.

Painted Surfaces – abrade to remove any weak or loose paint. Check remaining paint is well bonded. Very smooth, glossy paint should be lightly abraded to provide a key. Watco Bio D can be used to remove grease and oil from painted surfaces. Watco Concroff is a very powerful degreaser for contaminated bare concrete, (do not use on a previously painted surface since it can soften paint).

APPLICATION: The paint should be thoroughly stirred and must not be thinned. Apply by roller and work well into the surface. Use a paint brush for edges. Avoid applying the paint too thickly. The second coat can be applied as soon as the first coat is dry (generally 16 hours), and should be applied within 5 days. If more than 5 days elapse, the first coat should be lightly abraded before the second coat is applied. Avoid washing the surface for 7 days.

SAFETY: Watco Concrete Floor Paint is flammable and should be used in a well ventilated area. In common with all non-porous decorative finishes, the surface can become slippery under certain conditions. All product labels provide general safety information. Material Safety Data Sheets are available. Food products must be removed from the area during application and drying process.

How to paint a concrete floor

5L

 

Phone

01752 690997

CALL THE EXPERTS

Free shipping

FAST SHIPPING

NEXT DAY DELIVERY AVAILABLE

Money

PEACE OF MIND

14 DAY MONEY-BACK GUARANTEE

Payment

PRICE MATCH

CALL FOR BEST PRICES

Finish:

,

Colour

Blue Grey – RAL 7000, Dark Grey – RAL 7005, Hazzard Yello – RAL 1021, Light Grey – RAL 7035, Mid Blue – RAL 5015, Mid Green – RAL 6002, Mid Grey – RAL 7036, Sandstone – RAL 1014, Signal Red – RAL 3020, Stone – RAL 7032, Tile Red NO RAL, White – RAL 9010

Reviews

Be the first to review “Watco Concrete Floor Paint 5L”

We use cookies to ensure that we give you the best experience on our website.

Enquiry Form
Your Name
Email Address
Phone
Company
Contact Information
Message
Unit A2 Kingsley Close, Lee Mill Industrial Estate, Ivybridge, PL21 9LL
01752 690997
Send Message
Buy direct from one of the UK's leading fireproofing specialists.
I have read the Privacy Policy