For sales or technical enquiries call:

01752 690997 or 0800 0277 955

Or email us: ku.oc1560978742.tnia1560978742pfoor1560978742perif1560978742@sela1560978742s1560978742

Watco Epoxy Gloss Coat 5 Litre

Availability : In stock
£128.90

Watco Epoxy Gloss Coat has been re-formulated to produce a ‘Best in Class’ water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save recoating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available with a ‘diamond hard’ wax and ceramic additive provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts.

Epoxy Matt Coat is also available where a matt finish may be desirable to reduce glare or help hide minor imperfections in a worn concrete floor.

Available in 5 Litre

   Price Match - Call Now for Best Prices
   Bulk orders/trade enquiries: 01752 690997.
   Next working day delivery available.

NEED HELP?

Clear
SKU: N/A Categories: ,

Highly durable, attractive finish. Ideal for environments where a tough, easy clean surface is required.

Available in 5 Litre

The new, reinforced epoxy resin formulation also dries in half the time, so you can apply two coats in one day and get the floor back into use faster.

The attractive new colour range is now produced to RAL classic colours.

  • Coverage: Approx 30m² per 5 litres per coat. For interior use only. Two coats usually required.
  • Strong barrier: Resistant to oil, solvents, and harsh cleaning chemicals. Designed for factories, warehouses, workshops and showrooms.
  • Fast results: Cures in only 4-6 hours at 20° C so you can apply 2 coats in a single day. Ready to take light traffic in 12 hours and heavy traffic in 24 hours.
  • Trouble free: Easy to mix and apply, equipment can be cleaned in water. Watco Epoxy Coat goes over existing coatings, concrete, sand and cement, and wood. Also suitable for concrete with underfloor heating.
  • Concrete option: Use Watco Powerfloat Primer for application over powerfloated floors.

Watco Epoxy Gloss Coat has been re-formulated to produce a ‘Best in Class’ water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save recoating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available with a ‘diamond hard’ wax and ceramic additive provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts.

Epoxy Matt Coat is also available where a matt finish may be desirable to reduce glare or help hide minor imperfections in a worn concrete floor.

Hygienic grades incorporate Silver Ion technology and are ideal for areas where cleanliness and hygiene are as important as a hard wearing finish. Although the product tests as ‘low slip potential’, if positive traction is required please specify Watco Safety Coat.

All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC.

All tests have been undertaken to ISO standard where applicable and demonstrated this ‘Best Ever Formulation’ to be 40% harder wearing than previously.

SURFACE PREPARATION: Can be applied to bare or previously painted surfaces providing the paint is well bonded.

Bare Concrete – remove surface laitance, dust and any light dirt or grease deposits using Watco Etch & Clean. Watco Etch & Clean also etches smooth, bare concrete surfaces to provide a key. Flush with clean water and allow surface to dry. If residual damp remains this is acceptable since Epoxy Gloss Coat is breathable.

Powerfloated or very smooth surfaces – Watco Powerfloat Primer should be used on very smooth or power floated surfaces.

New Concrete – new concrete should be left for four weeks to dry in the summer and six in the winter. The surface should then be prepared using Watco Etch & Clean and thoroughly rinsed away and left to dry prior to applying this coating.

Painted surfaces – abrade to remove loose paint. Check remaining paint is well bonded. Very smooth, glossy paint should be lightly abraded to provide a key. Watco Bio D can be used to remove grease and oil from painted surfaces. Watco Concroff is a very powerful degreaser for contaminated bare concrete (Concroff can soften paint.)

Highly porous surfaces – a primer may be required for high suction surfaces such as sand and cement screed. Please contact us for advice.

MIXING: Remove the two inner tins from the tall outer tin. Stir the contents of each tin thoroughly and pour all of the contents into the outer tin (scrape around the inside of the tins to remove any residue). Mix the components together thoroughly using a spatula or similar wide bladed tool (a piece of wooden batten is ideal). Continue mixing until an even colour and consistency are obtained. Do not mix more than one pack at a time. If a paint stirrer fitted to an electric drill is used, also use the spatula to blend in any unmixed material from the sides and bottom of the tin.

APPLICATION: Best results are obtained in warm (minimum 15ºC), dry conditions with good ventilation. In very high temperatures (30ºC and above) it is recommended that bare concrete is lightly dampened first with water. Apply with a medium pile roller, working well into the surface of the concrete. Do not exceed the maximum coverage of 30m2 per 5 litre pack, per coat. The product will darken slightly as curing commences and it should not be over rollered. The second coat can be applied as soon as the first coat is dry (generally 4-6 hours) and should be applied within 5 days. If more than 5 days elapse, the first coat should be lightly abraded before the second coat is applied. Avoid washing the surface for seven days.

SAFETY: All product labels provide general safety information. Material Safety Data Sheets are available. Food products must be removed from the area during application and cure.

How to brighten and protect heavily trafficked areas with Epoxy Gloss Coat

5L

 

Phone

01752 690997

CALL THE EXPERTS

Free shipping

FAST SHIPPING

NEXT DAY DELIVERY AVAILABLE

Money

PEACE OF MIND

14 DAY MONEY-BACK GUARANTEE

Payment

PRICE MATCH

CALL FOR BEST PRICES

Finish

GLOSS, MATT

Colour

Black – RAL 9005, Blue Grey – RAL 7000, Dark BLue – RAL 5005, Dark Grey – RAL 7005, Deep Red – RAL 3003, Hazzard Yello – RAL 1021, Light Grey – RAL 7035, Mid Blue – RAL 5015, Mid Green – RAL 6002, Mid Grey – RAL 7036, Sandstone – RAL 1014, Signal Red – RAL 3020, Stone – RAL 7032, Tile Red NO RAL, White – RAL 9010

Reviews

Be the first to review “Watco Epoxy Gloss Coat 5 Litre”

We use cookies to ensure that we give you the best experience on our website.

Enquiry Form
Your Name
Email Address
Phone
Company
Contact Information
Message
Unit A2 Kingsley Close, Lee Mill Industrial Estate, Ivybridge, PL21 9LL
01752 690997
Send Message
Buy direct from one of the UK's leading fireproofing specialists.
I have read the Privacy Policy