For sales or technical enquiries call:

01752 690997 or 0800 0277 955

Or email us: ku.oc1561001570.tnia1561001570pfoor1561001570perif1561001570@sela1561001570s1561001570

Watco Flowpatch® Deep Fill Concrete Patch Repair

Availability : In stock
£45.00£91.00

Just what you need for filling holes between 50mm and 200mm deep. The coarser aggregate in this effective formula makes it a more economical way to deal with deeper hole and damaged concrete.

  • Coverage is 0.25m² per 25kg at 50mm thick

Flowpatch® and Flowpatch® Deep Fill are easy to mix, pourable materials for quick repairs to holes in concrete, both inside or outside. Each version is very strong and hardens quickly, and will accept heavy traffic including forklifts only 2 hours after application. Use the spouted jug to help fill small holes and cracks.

Clear
SKU: N/A Categories: ,

Just what you need for filling holes between 50mm and 200mm deep. The coarser aggregate in this effective formula makes it a more economical way to deal with deeper hole and damaged concrete.

  • Coverage is 0.25m² per 25kg at 50mm thick

Flowpatch® and Flowpatch® Deep Fill are easy to mix, pourable materials for quick repairs to holes in concrete, both inside or outside. Each version is very strong and hardens quickly, and will accept heavy traffic including forklifts only 2 hours after application. Use the spouted jug to help fill small holes and cracks.

  • Just add water, mix and pour
  • Can be applied to damp (not wet) concrete
  • Sets at low temperatures (down to 5°C)
  • Flowpatch® can be applied from feather edge to 100mm
  • Flowpatch® Deep Fill can be applied at any depth between 10-200mm
  • Light grey, fibre reinforced slip resistant finish
  • Ideal for filling deep holes before screeding with Watco Flowtop®
  • Coverage: Each unit of 25kg will cover approximately 0.5m² at 25mm thick

Surface Preparation
The substrate should be clean and free from oil or contaminants. Any loose material should be removed from the surface. If possible wire brush the surface. Edges of the repair should be cut to depth to avoid feather edging in heavy wear areas. Watco Flowpatch can be applied to damp (not wet) concrete.

Mixing
Remove the bag of powder from the plastic bucket and use the empty bucket or other suitable container for mixing. To mix, add the powder to water. Use a ratio of 175 – 225ml of clean cold water to 1kg of powder (as a guide approx. 3 units of powder by volume to 1 unit of water).

Due to the short working life of the mixed product, we recommend you carry out the mixing near to the repair, not near to the water source. It’s also useful to have a bucket of water nearby, so you can quickly immerse and clean the tools after use. Put the water into the empty bucket or container and gradually add the powder stirring constantly to achieve a pourable slurry. For small quantities mix by hand using a flat bladed tool such as a spatula, and for larger quantities use a mixer fitted into a slow speed electric drill. Do not add excessive water or drying time will be extended and the performance may be impaired. As the mixture hardens quickly, pour the Flowpatch into the hole to be repaired immediately. We do not recommend re-stirring as this could potentially weaken the final repair. Do not mix more than you can use within a few minutes (5 – 10 minutes at 20°C). The remaining powder can be stored for future use.

Application
When a smooth consistency is achieved, simply pour Watco Flowpatch in to the hole. If the product has been properly mixed it will self level and will need minimal trowelling. Watco Flowpatch can be applied to any depth between 5mm and 100mm, Flowpatch Deepfill can be applied to depths of 10-200mm. Repairs in lightly trafficked areas can be feather edged, but thin edges are not recommended for medium or heavily trafficked repairs.

How to quickly fill a hole in concrete using Watco Flowpatch

 

Size

10KG, 25kg

Reviews

Be the first to review “Watco Flowpatch® Deep Fill Concrete Patch Repair”

You may also like

Watco Epoxy Gloss Coat 5 Litre

£128.90 Incl. Vat: £154.68
0 review(s)

Watco Epoxy Gloss Coat 5 Litre

£128.90 Incl. Vat: £154.68

Watco Epoxy Gloss Coat 5 Litre

£128.90
Watco Epoxy Gloss Coat has been re-formulated to produce a ‘Best in Class’ water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save recoating costs. The rapid drying formula also allows the application of...

We use cookies to ensure that we give you the best experience on our website.

Enquiry Form
Your Name
Email Address
Phone
Company
Contact Information
Message
Unit A2 Kingsley Close, Lee Mill Industrial Estate, Ivybridge, PL21 9LL
01752 690997
Send Message
Buy direct from one of the UK's leading fireproofing specialists.
I have read the Privacy Policy