For sales or technical enquiries call:

01752 690997 or 0800 0277 955

Or email us: ku.oc1553274515.tnia1553274515pfoor1553274515perif1553274515@sela1553274515s1553274515

Watco Flowpatch Sub Zero

Availability : In stock
£66.30£165.20

Special formula for use when temperatures drop as low as -20° C. Because this product can be trowelled into holes from just 20mm to 100mm deep in one application, there’s no need to build up the repair in layers.

  • Coverage is 0.25m² at 20mm thick per 10kg – and 0.6m² at 20mm thick per 25kg.
  • Fast curing: Ready for light traffic after 1 hour.
  • Versatile: Can be used inside and out.
   Price Match - Call Now for Best Prices
   Bulk orders/trade enquiries: 01752 690997.
   Next working day delivery available.

NEED HELP?

Clear
SKU: N/A Categories: ,

Special formula for use when temperatures drop as low as -20° C. Because this product can be trowelled into holes from just 20mm to 100mm deep in one application, there’s no need to build up the repair in layers.

  • Coverage is 0.25m² at 20mm thick per 10kg – and 0.6m² at 20mm thick per 25kg.
  • Fast curing: Ready for light traffic after 1 hour.
  • Versatile: Can be used inside and out.

Watco Flowpatch Sub Zero is ideal for concrete floor repair in cold rooms. It will cure very rapidly to withstand heavy traffic, even at -20°C. Ideal for repairing holes or levelling damaged concrete floors.

  • Easy to use – just add water, mix and apply
  • Magnesium phosphate-based formula generates heat when mixed with water, allowing the product to be used as low as -20°C
  • Extremely tough – can withstand weight of up to 350kg/cm
  • Will accept light traffic in approx. 1 hour, heavy traffic in approx. 5 hours, depending on temperature
  • Coverage: approx. 10kg covers 0.25mm at 20mm thick
  • 25kg covers 0.6m² at 20mm thick

Surface Preparation
Remove all loose material including dust, oil and grease. Minimum application depth should be 20mm. Repair edges should be cut to depth to avoid feather-edging. Dampen bare concrete with clean, cold water. Remove any standing water. Briefly warm the area using a blowlamp or gas torch. This helps to accelerate curing.


Warning Do not mix the product for more than 4 minutes. Use immediately. Watco Flowpatch Sub Zero cures very quickly and the mixed product must be applied and finished within 10 minutes.

Mixing
Mixing must be carried out in an ambient temperature above 5ºC. If mixing at temperatures below 5ºC, pre-warm the mixing vessel with warm (approximately 25- 30ºC) water. Remove the bag of powder and pour 2 litres of clean, cold water into the plastic container. Gradually add all the powder, mixing thoroughly. Continue mixing to produce a smooth workable mortar.

Application
Trowel Watco Flowpatch Sub Zero firmly into place using a steel trowel or float (available from Watco). The trowel can be wiped with clean, cold water to make finishing easier. Apply the product at a minimum 20mm thickness, if using at a temperature range of -20ºC to 5ºC.

Phone

01752 690997

CALL THE EXPERTS

Free shipping

FAST SHIPPING

NEXT DAY DELIVERY AVAILABLE

Money

PEACE OF MIND

14 DAY MONEY-BACK GUARANTEE

Payment

PRICE MATCH

CALL FOR BEST PRICES

Size

10kg, 25kg

Reviews

Be the first to review “Watco Flowpatch Sub Zero”

You may also like

Watco Flowpatch® Deep Fill Concrete Patch Repair

£45.00£91.00
Just what you need for filling holes between 50mm and 200mm deep. The coarser aggregate in this effective formula makes it a more economical way to deal with deeper hole and damaged concrete. Coverage is 0.25m² per 25kg at 50mm thick Flowpatch® and Flowpatch® Deep Fill...

Watco Flowpatch Sub Zero – 25kg

£165.20 Incl. Vat: £198.24
0 review(s)

We use cookies to ensure that we give you the best experience on our website.

Enquiry Form
Your Name
Email Address
Phone
Company
Contact Information
Message
Unit A2 Kingsley Close, Lee Mill Industrial Estate, Ivybridge, PL21 9LL
01752 690997
Send Message
Buy direct from one of the UK's leading fireproofing specialists.
I have read the Privacy Policy