For sales or technical enquiries call:

01752 690997 or 0800 0277 955

Or email us: ku.oc1553272334.tnia1553272334pfoor1553272334perif1553272334@sela1553272334s1553272334

Watco Flowpatch Self Levelling Concrete Patch Repair 25kg

Availability : In stock
£112.00 Incl. Vat: £134.40

Simply add water, mix and pour to repair any area of damaged concrete. For rapid repairs to concrete, this will be ready for foot traffic after just 30 minutes and for forklift use within 2 hours.

Flowpatch will give a slip-resistant finish for real peace of mind and it can be applied quickly and easily to either dry or damp surfaces.

  • Coverage 0.5m² per 25kg at 25mm thick
  • Sets at low temperature: No need to wait for warm conditions. Cures at 10° C
   Price Match - Call Now for Best Prices
   Bulk orders/trade enquiries: 01752 690997.
   Next working day delivery available.

NEED HELP?

Categories: ,

Simply add water, mix and pour to repair any area of damaged concrete. For rapid repairs to concrete, this will be ready for foot traffic after just 30 minutes and for forklift use within 2 hours.

Flowpatch will give a slip-resistant finish for real peace of mind and it can be applied quickly and easily to either dry or damp surfaces.

  • Coverage 0.5m² per 25kg at 25mm thick
  • Sets at low temperature: No need to wait for warm conditions. Cures at 10° C

Flowpatch® is an easy to mix, pourable material for quick repairs to holes in level concrete, inside or outside. It is very strong and hardens quickly: it will accept heavy traffic including forklifts only 2 hours after application.

  • Just add water, mix and pour
  • Can be applied to damp (not wet) concrete
  • Sets at low temperatures (down to 5°C)
  • Flowpatch® can be applied from feather edge to 100mm
  • Light grey, slip resistant finish
  • Fibre reinforced

Coverage: Each unit of 10kg will cover approximately 0.5m² at 10mm thick .
Storage: Store in dry conditions.

Surface Preparation
The substrate should be clean and free from oil or contaminants. Any loose material should be removed from the surface. If possible wire brush the surface. Edges of the repair should be cut to depth to avoid feather edging in heavy wear areas. Watco Flowpatch can be applied to damp (not wet) concrete.

Mixing
Remove the bag of powder from the plastic bucket and use the empty bucket or other suitable container for mixing. To mix, add the powder to water. Use a ratio of 175 – 225ml of clean cold water to 1kg of powder (as a guide approx. 3.5 units of powder by volume to 1 unit of water).

Due to the short working life of the mixed product, we recommend you carry out the mixing near to the repair, not near to the water source. It’s also useful to have a bucket of water nearby, so you can quickly immerse and clean the tools after use. Put the water into the empty bucket or container and gradually add the powder stirring constantly to achieve a pourable slurry. For small quantities mix by hand using a flat bladed tool such as a spatula, and for larger quantities use a mixer fitted into a slow speed electric drill. Do not add excessive water or drying time will be extended and the performance may be impaired. As the mixture hardens quickly, pour the Flowpatch into the hole to be repaired immediately. We do not recommend re-stirring as this could potentially weaken the final repair. Do not mix more than you can use within a few minutes (5 – 10 minutes at 20°C). The remaining powder can be stored for future use.

Application
When a smooth consistency is achieved, simply pour Watco Flowpatch in to the hole. If the product has been properly mixed it will self level and will need minimal trowelling. Watco Flowpatch can be applied to any depth between 5mm and 100mm, Flowpatch Deepfill can be applied to depths of 10-200mm. Repairs in lightly trafficked areas can be feather edged, but thin edges are not recommended for medium or heavily trafficked repairs.

Phone

01752 690997

CALL THE EXPERTS

Free shipping

FAST SHIPPING

NEXT DAY DELIVERY AVAILABLE

Money

PEACE OF MIND

14 DAY MONEY-BACK GUARANTEE

Payment

PRICE MATCH

CALL FOR BEST PRICES

Reviews

Be the first to review “Watco Flowpatch Self Levelling Concrete Patch Repair 25kg”

We use cookies to ensure that we give you the best experience on our website.

Enquiry Form
Your Name
Email Address
Phone
Company
Contact Information
Message
Unit A2 Kingsley Close, Lee Mill Industrial Estate, Ivybridge, PL21 9LL
01752 690997
Send Message
Buy direct from one of the UK's leading fireproofing specialists.
I have read the Privacy Policy