Nullifire SC803 Intumescent Coating for Steel – 6.9kg and 25kg
Nullifire SC803 is an intumescent coating for steel which is optimised to UP TO 60 minutes, however it can achieve 90 minutes fire protection in some scenarios.
It should only be used on internal steels in areas where humidity is below 80%.
For a full specification for your steels, please contact us on 01752 690997.
Price Match - Call Now for Best Prices
Bulk orders/trade enquiries: 01752 690997.
Next working day delivery available.
SC803 can achieve a smooth white matt finish and only requires a topcoat if a decorative finish is required.
Please contact us on 01752 690997 for a list of compatible topcoats. These can be tinted to any of the RAL colour codes.
Ultra-low VOC content
This paint should be applied to a clean, undamaged and dry, primed surface. Please contact us on 01752 690997 for a full list of primers.
It is paramount that the steels and the basecoat do not get wet during application and drying.
The air and surface temperature of the steels should be at least 5°C upon application and a maximum of 40°C.
Steel surface temperature should be at least 3°C above the dew point.
The product must not be thinned. Instead, it should be mixed with a mechanical mixer in preparation for application.
We recommend application by airless spray. This product can also be applied by brush or roller. A short piled roller will achieve a light textured finish.
For correct wet film thickness, please contact us on 01752 690997.
We recommend to overcoat the intumescent after a minimum of 16 hours.
Please store in a dry area in temperatures between 5°C and 35°C .
It has a shelf life of 9 months in an un-opened container.
CALL THE EXPERTS
NEXT DAY DELIVERY AVAILABLE
PEACE OF MIND
14 DAY MONEY-BACK GUARANTEE
CALL FOR BEST PRICES