TBA High Temperature Adhesive

TBA’s High Temperature Adhesive is primarily designed to seal penetrations to fire barriers in the TBA Firefly range.

It is suitable to use alongside the TBA Firefly Collaroll and their fire curtains.

It can also bond metals and other low absorbency materials which are resistant to high temperatures.

Technical Data of TBA’s High Temperature Adhesive:

Chemical Composition & Qualities

TBA’s High Temperature Adhesive is a Silica-based ceramic compound, that is white in colour.

It provides solvent resistance to most non-aqueous chemicals

Viscosity – 1400m. Pa.s.

Non toxic, non hazardous

Good electrical resistance

Solvent resistance to most non-aqueous chemicals

Fire Testing

This product has been tested to BS 476 PART 4: 1970.

The test has classified it as “non-combustible”

Application

Please allow the adhesive cure at an ambient temperature for at least 24 hours after application.

The curing time will be affected by the assembly.

Please follow the application instructions relevant for the fire curtain you are using this with.

Packaging & Storage

This product is supplied in both 330ml standard gun cartridges

Do not remove the product from its original containers.

To ensure its maximum shelf-life is maintained, please store this product between 5°C and 25°C

At this temperature, expected shelf-life is 12 months.

To view our range of fire curtains, please click here.

For technical enquiries and further information, please contact us.