Enviromose Water-based Paint & Varnish Stripper

£69.50 inc. VAT: £83.40

Enviromose Advanced water-based paint stripper is suitable for stripping various substrates, both internally and externally.

Outside areas include buildings, boats, railings and wooden structures. Internal areas include doors, panelling, walls, ceilings and floors.

This product can remove paints, varnishes, lacquers, Artex®, graffiti and carpet adhesive.

Out of stock

Enviromose Water-Based Paint and Varnish Stripper

Enviromose Advanced water-based paint stripper is suitable for stripping various substrates, both internally and externally.

Outside areas include buildings, boats, railings and wooden structures. Internal areas include doors, panelling, walls, ceilings and floors.

This product can remove paints, varnishes, lacquers, Artex®, graffiti and carpet adhesive.

It is waterborne, non-flammable, non-corrosive, non-caustic and safe to handle, releasing a minimal gentle odour.

 

Application

We recommend using this product on surfaces that are at least 10 degrees Celcius.

This is because under 10 degrees it strips the surface very slowly.

The warmer the temperature the quicker the strip, with the optimum temperature at 25 degrees.

Multiple layers of paint/varnish etc. will also take longer to strip.

We advise that tough, thick coats of product to be stripped should be covered in plastic and left overnight whilst the paint stripper is on it.

 

Apply the product liberally – DO NOT BRUSH OUT. Spreading rate is 1 – 4 sqm per litre.

Lay Stripper onto the surface with a clean paint brush then leave to strip the product.

You should apply a second coat after two hours if the product is considered heavy/tough. As mentioned above, a plastic covering may assist the process.

Once the paint stripper has penetrated through to the substrate, scrape it off with a suitable tool, to ensure that the surface is as clean as possible.

Residues should be removed with cold water and a stainless steel scourer (do not use wire wool) then left to dry.

If a perfect finish is required, for example on wood that will be varnished, rinse with Magic Bullet Multi-Surface Cleaner.

Rough stripping times:

  • paint and varnish – 30 to 60 minutes
  • two pack coatings – 60 to 90 minutes
  • two pack lacquers – 90 minutes to 4 hours
  • artex and multiple paint layers – 90 minutes to overnight.

Never let the paint stripper to dry out.

It is recommended that you test the product on a small test patch area before use.

The safety data sheet can be found in the data sheets tab above.

Please contact us for further information.

FAST SHIPPING

Next day delivery available

peace of mind

14 day returns policy

price match

Call for the best prices

01752 690997

Speak to our experts

Data Sheets