Intumescent Door Upgrade Kit to Fire Door Standard FD30
This intumescent paper with thin white fireproof card facing for use in hard-wearing situations and it can be applied to doors with intumescent adhesive, to give them a fire rating of 30 or 60 minutes, depending on the thickness and type of wood of the stiles and rails. The paper is also supplied pre-adhered to genuine wood veneers or thin plywood. After fitting, the card and the plywood may be painted over or varnished. The paper can be supplied independently for use by door manufacturers. It can be used between 4mm plywood panels if new doors are being made, giving 30 minutes of fire protection. If fitted between 12mm plywood panels, it can give 60 minutes of fire protection.
Envirograf® intumescent paper is applied to doors with Envirograf® Acrylic Thixotropic Adhesive (Product 46).
| ES/MP/FC2 | with 250gsm fire protection card |
| ES/MP/FC3 | with 320gsm fire protection card |
| ES/MP/GP44 | with Gaboon Ply facing |
| ES/MP/PLY | with 1.8mm birch ply facing (Ideal for stripped pine doors) |
| ES/MP/V | Veneered sheet* |
| IA | Intrumescent adhesive |
| LABEL | "Fire Door - Keep Shut" label |
Available in Ash, Cherry, Pine, Sapele, and White Oak from stock and Black Walnut, Maple, Red Oak, Steamed Beech,
and White Beech to special order.
| Finish | Dry components | Plus these liquid components:- | |||||
| - | - | - | 1/4 litre | 1/4 litre | 1/3 litre | 1/4 litre | 1/4 litre |
| ES/MP/DK1 | White | 900x1300mm Paper & Fire Card |
IA Adhesive |
NA | HW01 White Coat |
HW04 Undercoat |
White Finish Gloss/Satin |
| ES/MP/DK2 | Clear | 1200x1200mm Wood Veneer |
IA Adhesive |
HWAP Primer |
HW02 Clear Coat |
HW03 Top Coat |
Not Applicable |
| ES/MP/DK3 | Clear | 1200x1200mm Gaboon Plywood |
IA Adhesive |
HWAP Primer |
HW02 Clear Coat |
HW03 Top Coat |
Not Applicable |
*Available in Ash, Cherry, Pine, Sapele, and White Oak from stock and Black Walnut, Maple, Red Oak, Steamed Beech,
and White Beech to special order.