Envirograf HW Ultra White Topcoat – 1L

Availability: In Stock

£16.53

HW Ultra White Topcoat

Envirograf’s HW Ultra White Topcoat is a water-based finish, to go over the top of HW01, ES/VFR White and EP/FS/INT. It is only suitable for internal use and comes in matt, satin, or gloss.

Can be applied by brush, roller or spray.

It can also be tinted to most RAL and BS colour codes. Please contact us if this is of interest.

 

Clear

Envirograf HW Ultra White Topcoat – 1L

HW Ultra White Topcoat is a water-based finish, to go over the top of HW01, ES/VFR White and EP/FS/INT. It is only suitable for internal use and comes in matt, satin, or gloss.

If purchased off the website, it will come as white, but it can also be tinted to most RAL and BS colour codes. Please contact us if this is of interest.

Application of Ultra White Topcoat:

Can be applied with a brush, roller or sprayer and has a theoretical coverage rate of 10m² per litre.

All surfaces should be clean, dry and free from contamination.

Ultra White is ready for use and does not need thinning. Stir well before application.

The result is dependent on the condition of the substrate and temperature of application.

Clean tools and spillages immediately with warm water.

Containers must be kept tightly closed and stored at a minimum temperature of 5°C and a maximum temperature of 35°C.

Ensure good ventilation during application and drying. Do not inhale vapour or spray mist.

Avoid contact with skin and eyes. Wear suitable protective clothing including gloves and eye/face protection. Wear a mask when spraying.

In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

After contact with skin, wash immediately with plenty of soap and water or a recognised skin cleaner. Do not use solvent or thinners.

Do not ingest. If swallowed seek medical advice immediately.

Keep out of the reach of children.

IMPORTANT INFORMATION ON PURCHASING OF PASSIVE FIRE PROTECTION PRODUCTS NOTICE:

The information displayed about the products on this website is to be used for guidance ONLY. We advise that all customers contact our technical department to obtain a free no obligation specification and quotation before purchasing goods directly from the website.

Products purchased directly from our website without specification will NOT qualify for certification.

Please be aware that any negligence caused by failure to obtain the relevant advice, or availment of our specification and estimation service, will absolve International Passive Fire Ltd from any liability should Passive Fire Protection Products prepared, or used, by the purchaser, or any other parties, result in damage to property or human life, or for any monetary costs incurred due to incorrect usage.

FAST SHIPPING

Next day delivery available

peace of mind

14 day returns policy

price match

Call for the best prices

01752 690997

Speak to our experts

Data Sheets

Finish:

, ,