Aithon F3 Finish Coat – 4kg & 20kg
Aithon F3 Finish Coat is a solvent-borne topcoat, which is to be used in conjunction with Aithon PV33 only.
This topcoat produces a matt wax finish.
PV33 MUST be coated in 3 Finish Coat on to seal the intumescent and stop it turning milky in colour over time.
Spreading rates: 80m² per 4kg and 400m² per 20kg
Please see application conditions below.
To be used in conjunction with Aithon PV33 only.
Aithon F3 Finish Coat produces a matt wax finish.
Please ensure that the product is applied and dried in conditions that are warmer than 5°C and that ambient humidity is lower than 70%.
The moisture content of the timber should be checked and must be below 12% before application of the PV33.
The F3 Finish coat can be applied one day after applying the PV33 basecoat.
FOR FULL INSTRUCTIONS PLEASE ENQUIRE ON 01752 690997 OR
PV33 and F3 Finish Coat can be applied by brush, roller or a spray gun.
Stir the products thoroughly before application.
IMPORTANT INFORMATION ON PURCHASING OF PASSIVE FIRE PROTECTION PRODUCTS NOTICE:
The information displayed about the products on this website is to be used for guidance ONLY, we advise that all customer contact our technical department to obtain a free no obligation specification and quotation before purchasing goods directly from the website.
Products purchased directly from our website without specification will NOT qualify for certification.
Please be aware that any negligence caused by failure to obtain the relevant advice, or availment of our specification and estimation service, will absolve International Passive Fire Ltd from any liability should Passive Fire Protection Products prepared, or used, by the purchaser, or any other parties, result in damage to property or human life, or for any monetary costs incurred due to incorrect usage.